{"title":"Evacuation, Fire \u0026 Rescue Equipment","description":null,"products":[{"product_id":"car-emergency-slide-board-kit","title":"Car Emergency Slide Board Kit","description":"\u003cp\u003eThe Car Emergency Slide Board Kit provides a safe way to get an unconscious person out of a car. The Emergency Department has a difficult manual handling task when a car arrives at a hospital with an unconscious person either in the front or rear car seat.\u003cbr\u003e\nDepending on the patient’s condition and position they can be slid out of the car either head or feet first.\u003cbr\u003e\nBy using the Slide Board Kit, this difficult manual handling task is made easier. If necessary the Straps are fastened around the ankles, thighs and waist of the patient. Then the specially shaped flexible Slide Board is positioned under the patient.\u003cbr\u003e\nThe Carers can then pull the Slide Straps from outside of the car, using their body weight and standing in a good manual handling position. As the Slide Board is very flexible, it will bend up to a trolley or down to the ground.\u003cbr\u003e\nIt has been reported back to us that at one hospital a man was evacuated from a car in under one minute. The following week it took two minutes to evacuate a pregnant lady and get her safely out of the car. It took extra time as they had to be more careful handling two people.\u003cbr\u003e\nNote: As this is considered an over-sized item, customers from outside of Australia should\u003cbr\u003e\ncontact\u003cbr\u003e\nus before placing an order so that we can provide an accurate shipping cost.\u003cbr\u003e\nSafe Working Load (SWL)\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nfor information relating to Safe Working Loads and plastic versus wooden slide boards.\u003cbr\u003e\nAlso available in the Pelican Slide Board range:\u003cbr\u003e\nSlide Board – Aero Transfer\u003cbr\u003e\nSlide Board –\u003cbr\u003e\nStubby\u003cbr\u003e\nSlide Board – Boomerang\u003cbr\u003e\nSlide Board – Wheelchair Cut Out\u003cbr\u003e\nResQsllide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nEmergency Stretcher\u003c\/p\u003e\n\n\u003cp\u003eItem # 597K\u003cbr\u003e\nNote: As this is considered an over-sized item, customers from outside of Australia should\u003cbr\u003e\ncontact\u003cbr\u003e\nus before placing an order so that we can provide an accurate shipping cost.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242122154296,"sku":"597K","price":496.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/car-emergency-slide-board-kit-cover-image.jpg?v=1747625944"},{"product_id":"emergency-stretcher","title":"Emergency Stretcher","description":"\u003cp\u003eThe Emergency Stretcher can be used in confined conditions or even for carrying people up and down stairs. It can be used by many Carers sharing the weight. The Emergency Stretcher folds up easily to an approximate size of 22cm x 30cm x 6cm for convenient storage.\u003cbr\u003e\nThe Stretcher is made from the same strong nylon that we make our mechanical lifting hoist slings from. The lifting slings have been weight tested to over 300kg \/ 660lbs. The stretcher is easy to store and take to a Patient as well as being easy to lift and carry a Patient. It can be left under patients during X-Rays, saving unnecessary lifting from the stretcher to the X-Ray table.\u003cbr\u003e\nTwo pockets are provided on both sides to put long poles (not included) in if necessary, though in many instances, the ease of using the webbing handles makes it very convenient for two or more Carers to carry the Patient. We recommend that two Carers should only lift lightweight patients, under 55kg \/ 121lbs. However, with more Carers holding on either side, far heavier patients can be carried.\u003cbr\u003e\nThe\u003cbr\u003e\nEmergency Stretcher Bag\u003cbr\u003e\n(sold separately)\u003cbr\u003e\nis a durable, clear plastic storage bag with a hanging loop and a sign with brief instructions for use. The Bag is a useful way to store the Emergency Stretcher in an easy-to-access location, so that it is always ready to use in an emergency.\u003cbr\u003e\nTo Use\u003cbr\u003e\nFold the Emergency Stretcher roughly into thirds length wise. Check the Patient for spinal injuries. Once permission has been given to move them, roll them onto the folded Emergency Stretcher. Once the Patient is in position, unfold it so that the webbing handles are either side of the Patient. The Carers should bend their knees and hold the webbing handles in both hands.\u003cbr\u003e\nWe suggest the Carers use both hands when lifting, although in some circumstances, the Carers may use only one hand if the other hand is needed to hold on to hand rails. If possible, try to have Carers of the same height carrying the stretcher.\u003cbr\u003e\nIf carrying a Patient up or down stairs, the stretcher can be used to hold the Patient as if sitting in a chair.\u003cbr\u003e\nView the full range of\u003cbr\u003e\nEvacuation, Fire \u0026amp; Rescue Equipment\u003cbr\u003e\nhere.\u003c\/p\u003e\n\n\u003cp\u003eItem # 599 – Emergency Stretcher\u003cbr\u003e\nItem # 599-BAG – Emergency Stretcher Bag\u003cbr\u003e\nSWL 300kg\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"attribute_option:Emergency Stretcher","offer_id":50242122481976,"sku":"599-VARIOUS","price":143.0,"currency_code":"AUD","in_stock":true},{"title":"attribute_option:Emergency Stretcher Bag","offer_id":50242122514744,"sku":"599-BAG","price":36.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/1-emergency-stretcher-main-image.jpg?v=1747625957"},{"product_id":"flame-retardant-kitchen-apron","title":"Flame Retardant Kitchen Apron","description":"\u003cp\u003eThe Flame Retardant Kitchen Apron is designed to be worn by kitchen staff to help prevent burns or spitting fat and flame flare-ups.\u003cbr\u003e\nThe front is made from a flame retardant material made in the USA. It is used for a variety of garments in high risk industries. These include shirts, pants, coveralls, jackets, bib overalls, arc flash suits for maintenance \u0026amp; electrical workers and for workers in electric utilities, oil, gas, petrochemical, chemical and ferrous metal industries.\u003cbr\u003e\nThe back is made from open netting material, which is not a fire or flame retardant material. This material is cooler and generally protection is only required at the front.\u003cbr\u003e\nThe Flame Retardant Kitchen Apron has two pockets at the front, and ties on either side.\u003cbr\u003e\nTesting\u003cbr\u003e\nWe carried out some in-house testing with this material. A sample was held over a burning flame for 30 seconds without any noticeable difference to the material. Also, hot dripping fat was dropped on to the material without any significant burning to an exposed arm under the material. Please remember that this test was only for a short period of time. The time transmitted heat could cause injury if the ‘flame test’ or ‘fat test’ was for a longer duration.\u003cbr\u003e\nWarning\u003cbr\u003e\nThis material is not designed for firefighting or any prolonged time in a flame or under hot fat.\u003cbr\u003e\nPelican also makes other Fire Retardant products, such as the\u003cbr\u003e\nSmoking Protector\u003cbr\u003e\n.\u003c\/p\u003e\n\n\u003cp\u003eItem # 229\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242123039032,"sku":"229","price":130.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/flame-retardant-kitchen-apron-2.jpg?v=1747625966"},{"product_id":"resqmat","title":"ResQmat","description":"\u003cp\u003eThe ResQmat is an evacuation mat, designed to safely evacuate and rescue a non-ambulant person from a building in an emergency situation. The Evacuee may be in a wheelchair or they may not be able to walk down stairs, if the lifts are not available due to fire or an electrical failure.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nFeatures\u003cbr\u003e\nCompletely encloses the legs and arms. This prevents people from reaching out whilst being rescued, and possibly impeding the rescue.\u003cbr\u003e\nStrong, thick Hook \u0026amp; Loop Tape straps.\u003cbr\u003e\nPadded head pillow protects the head when going down stairs.\u003cbr\u003e\nFull length mini mattress protects the body when going down stairs.\u003cbr\u003e\nAutomatically fits to size.\u003cbr\u003e\nThe ResQmat is a bright yellow\/gold colour with bright green Pulling Straps to stand out in poor light conditions. The yellow Storage Bag and Pulling Straps have some Hi Vis Tape made to Australian Standard 906.4. Many fires start at night. If the electricity is turned off, Rescuers need to find the ResQmat in poor light. Outside of the building, the bright colours and reflective tape will help the outside Rescuers see the ResQmat coming. This allows them to assist evacuation away from the building.\u003cbr\u003e\nIn any building over two storeys high, if there is a power failure or a fire, the electricity is turned off and the lifts or elevators then cannot be used. It is difficult and probably impossible, for people in wheelchairs or using Zimmer Frames or walking sticks, to walk down stairs. The ResQmat can be used in office buildings, theatres, libraries, hospitals, schools, etc. Even if a wheelchair user does not work in the building, a visitor who does use a wheelchair may be in the building when there is a power failure or fire, and they will not be able to use the stairs to evacuate. When not in use, the ResQmat can hang from a hook or be stored in a cupboard, ready to use when an evacuation mat is necessary.\u003cbr\u003e\nIt is important that all staff have manual handling training in using the ResQmat, so they will know how to use it in an emergency. When training, it may be better to stop the training by the escape door, because if the ResQmat is dragged across a driveway, the bottom surface may be scratched beyond repair. Proposed escape routes should be trialed for evacuation in different directions depending on where the fire may start. It may be necessary to move some furniture to allow more room to move.\u003cbr\u003e\nTo Use\u003cbr\u003e\nTake the ResQmat to the Patient. Remove the strap that is around the ResQmat and unfold the ResQmat.\u003cbr\u003e\nWhen the Patient is on top of the ResQmat, place their head on the pillow with their shoulders close to the edge of the pillow. The oversize pillow is to protect the Patient’s head when going around corners.\u003cbr\u003e\nThe methods outlined below are only some suggested ways of getting the Patient onto the ResQmat. Your Manual Handling Advisor may have a better suggestion for this task.\u003cbr\u003e\nIf the Patient is in bed\u003cbr\u003e\nLog roll the Patient to place the ResQmat under them. It is better to place the side of the ResQmat with the soft Hook and Loop Tape under the Patient. If the side with the Red Shortening Strap is tucked in first under the patient the Red Shortening Strap may catch underneath the Patient.\u003cbr\u003e\nIf the Patient is in a chair\u003cbr\u003e\nPlace the ResQmat on the floor in front of the chair with the pillow near the Patient’s feet. If they are in a wheelchair, apply the brakes, remove the foot plates or swing them out of the way. Lift the Patient’s legs to pull them, so they slide down into the ResQmat. This is easier if a second Carer can hold the Patient under the arms to help them slide, remember this is only used for an emergency evacuation. It also may be possible to stand the Patient and have the ResQmat near the chair to lay the Patient onto the ResQmat. There may not be enough Carers, so always ask your Manual Handling Advisor to learn a safe method for patients and Carers.\u003cbr\u003e\nWhen the Patient is on the ResQmat\u003cbr\u003e\nFirmly wrap the sides of the ResQmat over the Patient and secure the Hook \u0026amp; Loop Tape onto the opposite side. Start nearest the feet. Make sure the Red Shortening Strap is clear of the Patient’s feet.\u003cbr\u003e\nThe Patient’s feet should be inside the ‘V’ section of the Red Strap. After the four Hook \u0026amp; Loop Tape fastenings are firmly done up, pull the Red Strap from the foot of the sheet through the buckle near the chest, so the length of the ResQmat is made shorter as it wraps over the Patient’s feet. Use one hand to push the Red Strap into the buckle and the other hand to pull the Strap away from the buckle. Then close the clamp latch to secure the strap. Even if the webbing is not neatly in the buckle and some webbing is over the edge, the buckle should still close and lock the webbing. By shortening the length of the ResQmat it helps secure the Patient when they are taken down stairs feet first.\u003cbr\u003e\nThere is a second pulling strap located under the pillow and this can be used to help lower someone from a bed or if it is necessary, to pull from the head end of the ResQmat. This strap can be used to help the descent if going down stairs; on stair landings; turning around corners etc. In most evacuations this pulling strap will be kept out of the way, by storing it under the pillow. As there is less strain to pull from the foot end, only use the head pulling strap if necessary.\u003cbr\u003e\nThe Patient should be pulled clear of the building to a designated muster area approved by your facility.\u003cbr\u003e\nMaintenance\u003cbr\u003e\nWe recommend an annual inspection to ensure vermin have not caused any damage. The direction of the corrugations on the plastic board means that it is not necessary to unroll it every few months.\u003cbr\u003e\nThe full range of ResQproduct options are listed below.\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nSame as the ResQsheet above, but with a built-in white plastic slide board underneath. Slides well on all floor surfaces including Vinyl \u0026amp; Carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nA special version of our ResQsheet for Vinyl \u0026amp; Carpet, made to fit deep mattress beds, and can also be used with pressure care air-flow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem #\u003cbr\u003e\n220P\u003cbr\u003e\nSafe Working Load (SWL):\u003cbr\u003e\n300kg \/ 660lbs (Lifting using all straps)\u003cbr\u003e\nSize:\u003cbr\u003e\nHeight: Fits people 136cm to 192cm (54″ to 76″)\u003cbr\u003e\nWidth: Fits people to a maximum of 160cm (63″) circumference\u003cbr\u003e\nNote:\u003cbr\u003e\nThere is no Standard for this product, therefore we have adopted the testing requirements as set out in International Standard ISO 10535:2011: Hoists for the transfer of disabled persons – Requirements and test methods. This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit some bariatric people. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we can supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242123891000,"sku":"220P","price":454.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/resqmat-2.jpg?v=1747625985"},{"product_id":"resqme","title":"ResQme","description":"\u003cp\u003eThe ResQme is designed to safely evacuate a non-ambulant person from a building in an emergency situation. The Evacuee may be in a wheelchair or they may not be able to walk down stairs, if the lifts are not available due to fire or an electrical failure.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nThe ResQme is a bright yellow\/gold colour with bright green Pulling Straps to stand out in poor light conditions. The yellow Storage Bag and Pulling Straps have some Hi Vis Tape made to Australian Standard 906.4. Many fires start at night. If the electricity is turned off, Rescuers need to find the ResQme in poor light. Outside of the building, the bright colours and reflective tape will help the outside Rescuers see the ResQme coming. This allows them to assist evacuation away from the building.\u003cbr\u003e\nIn any building over two storeys high, if there is a power failure or a fire, the electricity is turned off and the lifts or elevators then cannot be used. It is difficult and probably impossible, for people in wheelchairs or using Zimmer Frames or walking sticks, to walk down stairs. The ResQme can be used in office buildings, theatres, libraries, hospitals, schools, etc. Even if a wheelchair user does not work in the building, a wheelchair user may be in the building when there is a power failure or fire, and they will not be able to use the stairs to evacuate. When not in use, the ResQme can hang from a hook or be stored in a cupboard, ready to use when an evacuation is necessary.\u003cbr\u003e\nThis item is not suitable for most spiral staircases.\u003cbr\u003e\nTo Use\u003cbr\u003e\nTake the ResQme to the Patient. Remove the strap that is around the ResQme and unfold the ResQme.\u003cbr\u003e\nWhen putting the Patient on top of the ResQme, place their head on the pillow with their shoulders close to the edge of the pillow. The oversize pillow is to protect the Patient’s head when going around corners.\u003cbr\u003e\nThe methods outlined below are only some suggested ways of placing the Patient onto the ResQme. Your Manual Handling Advisor may have a better suggestion for this task.\u003cbr\u003e\nIf the Patient is in bed\u003cbr\u003e\nLog roll the Patient to place the ResQme under them.\u003cbr\u003e\nIf the Patient is in a chair\u003cbr\u003e\nPlace the ResQme on the floor in front of the chair with the pillow near the Patient’s feet. If they are in a wheelchair, apply the brakes, remove the foot plates or swing them out of the way. Lift the Patient’s legs to pull them, so they slide down into the ResQme. This is easier if a second Carer can hold the Patient under the arms to help them slide, remember this is only used for an emergency evacuation. It also may be possible to stand the Patient and have the ResQme near the chair to lay the Patient onto the ResQme. There may not be enough Carers, so always ask your Manual Handling Advisor to learn a safe method for patients and Carers.\u003cbr\u003e\nWhen the Patient is on the ResQme\u003cbr\u003e\nPlace the person’s feet at the foot end, hard up against the plastic. Secure the Hook \u0026amp; Loop Tape to hold the person in. Position the pillow so it is comfortable under the head.\u003cbr\u003e\nThere is a second pulling strap located at the head end and this can be used to help lower someone from a bed or if it is necessary, to pull from the head end of the ResQme. This strap can be used to help the descent if going down stairs; on stair landings; turning around corners etc. In most evacuations this pulling strap will be kept out of the way, by storing it under the pillow. As there is less strain to pull from the foot end, only use the head pulling strap if necessary.\u003cbr\u003e\nThe Patient should be pulled clear of the building to a designated muster area approved by your facility.\u003cbr\u003e\nIt is important that all staff have manual handling training in using the ResQme, so they will know how to use it in an emergency. When training, it may be better to stop the training by the escape door, because if the ResQme is dragged across a driveway, the bottom surface may be scratched beyond repair. Proposed escape routes should be trialed for evacuation in different directions depending on where the fire may start. It may be necessary to move some furniture to allow more room to move.\u003cbr\u003e\nMaintenance\u003cbr\u003e\nWe recommend you inspect annually, to ensure vermin have not caused any damage. The direction of the corrugations on the plastic board means that its not necessary to unroll it every few months.\u003cbr\u003e\nThe full range of ResQproduct options are listed below.\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nSame as the ResQsheet above, but with a built-in white plastic slide board underneath. Slides well on all floor surfaces including Vinyl \u0026amp; Carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nA special version of our ResQsheet for Vinyl \u0026amp; Carpet, made to fit deep mattress beds, and can also be used with pressure care air-flow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem #\u003cbr\u003e\n220M\u003cbr\u003e\nDesign Application Number:\u003cbr\u003e\n14534 \/ 2011\u003cbr\u003e\nSafe Working Load (SWL):\u003cbr\u003e\n200kg \/ 440lbs\u003cbr\u003e\nSize:\u003cbr\u003e\nHeight: Fits people 136cm to 198cm (54″ to 78″)\u003cbr\u003e\nWidth: Fits people to a maximum of 170cm (67″) circumference\u003cbr\u003e\nNote:\u003cbr\u003e\nThere is no Standard for this product, therefore we have adopted the testing requirements as set out in International Standard ISO 10535:2011:\u003cbr\u003e\nHoists for the transfer of disabled persons – Requirements and test methods\u003cbr\u003e\n. This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit some bariatric people. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we may be able to supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242125529400,"sku":"220M","price":294.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/resqme-5.jpg?v=1747626011"},{"product_id":"resqpod","title":"ResQpod","description":"\u003cp\u003eThe ResQpod is designed to safely evacuate a non-ambulant person from a building in an emergency situation. The Evacuee may be in a wheelchair or they may not be able to walk down stairs, if the lifts are not available due to fire or an electrical failure.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nThe ResQpod is a bright yellow\/gold colour with bright green Pulling Straps to stand out in poor light conditions. The yellow Storage Bag and Pulling Straps have some Hi Vis Tape made to Australian Standard 906.4. Many fires start at night. If the electricity is turned off, Rescuers need to find the ResQpod in poor light. Outside of the building, the bright colours and reflective tape will help the outside Rescuers see the ResQpod coming. This allows them to assist evacuation away from the building.\u003cbr\u003e\nIn any building over two storeys high, if there is a power failure or a fire, the electricity is turned off and the lifts or elevators then cannot be used. It is difficult and probably impossible, for people in wheelchairs or using Zimmer Frames or walking sticks, to walk down stairs. The ResQpod can be used in office buildings, theatres, libraries, hospitals, schools, etc. Even if a wheelchair user does not work in the building, a wheelchair user may be in the building when there is a power failure or fire, and they will not be able to use the stairs to evacuate. When not in use, the ResQpod can hang from a hook or be stored in a cupboard, ready to use when an evacuation is necessary.\u003cbr\u003e\nThis item is not suitable for most spiral staircases.\u003cbr\u003e\nTo Use\u003cbr\u003e\nTake the ResQpod to the Patient. Remove the strap that is around the ResQpod and unfold the ResQpod.\u003cbr\u003e\nWhen putting the Patient on top of the ResQpod, place their head on the pillow with their shoulders close to the edge of the pillow.\u003cbr\u003e\nThe methods outlined below are only some suggested ways of getting the Patient onto the ResQpod. Your manual handling advisor may have a better suggestion for this task.\u003cbr\u003e\nIf the Patient is in bed\u003cbr\u003e\nLog roll the Evacuee onto the ResQpod. If their head is not on the pillow, the Rescuers can slide the Evacuee up into position.\u003cbr\u003e\nIf the Patient is in a chair\u003cbr\u003e\nPlace the ResQpod on the floor in front of the chair with the pillow near the Patient’s feet. If they are in a wheelchair, apply the brakes, remove the foot plates or swing them out of the way. Lift the Patient’s legs to pull them, so they slide down into the ResQpod. This is easier if a second Carer can hold the Patient under the arms to help them slide, remember this is only used for an emergency evacuation. It also may be possible to stand the Patient and have the ResQpod near the chair to lay the Patient onto the ResQpod. There may not be enough Carers, so always ask your Manual Handling Advisor to learn a safe method for patients and Carers.\u003cbr\u003e\nWhen the Patient is on the ResQpod\u003cbr\u003e\nPlace the Evacuee’s arms on their stomachs, or hands on their laps and do up the Hook \u0026amp; Loop firmly\u003cbr\u003e\n.\u003cbr\u003e\nDo up the Hook \u0026amp; Loop around the upper and lower legs or around the feet of shorter Evacuees.\u003cbr\u003e\nAttach the Orange Length Adjusting Strap to the Shoulder Strap. Pull the Length Adjusting Strap to shorten the length of the ResQpod. The shorter ResQpod is more secure for the Evacuee, and is easier to manoeuvre going around corners, and on stair landings. There are two Carry Handles on each side for lifting the ResQpod up off the ground (Requires 4-6 rescuers).\u003cbr\u003e\nThe Patient should be pulled clear of the building to a designated muster area approved by your facility.\u003cbr\u003e\nIt is important that all staff have manual handling training in using the ResQpod, so they will know how to use it in an emergency. When training, it may be better to stop the training by the escape door, because if the ResQpod is dragged across a driveway, the bottom surface may be scratched beyond repair. Proposed escape routes should be trialed for evacuation in different directions depending on where the fire may start. It may be necessary to move some furniture to allow more room to move.\u003cbr\u003e\nMaintenance\u003cbr\u003e\nWe recommend you inspect annually, to ensure vermin have not caused any damage. The direction of the corrugations on the plastic board means that it is not necessary to unroll it every few months.\u003cbr\u003e\nThe full range of ResQproduct options are listed below.\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nSame as the ResQsheet above, but with a built-in white plastic slide board underneath. Slides well on all floor surfaces including Vinyl \u0026amp; Carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nA special version of our ResQsheet for Vinyl \u0026amp; Carpet, made to fit deep mattress beds, and can also be used with pressure care air-flow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem # 220RP\u003cbr\u003e\nSafe Working Load (SWL): 290kg \/ 639lbs (Lifting using all straps)\u003cbr\u003e\nSize:\u003cbr\u003e\nHeight: Fits people 136cm to 192cm (54″ to 76″)\u003cbr\u003e\nWidth: Fits people to a maximum of 160cm (63″)\u003cbr\u003e\nNote: There is no Australian or International Standard for this product, therefore we have adopted the testing requirements as set out in ISO 10535:2011 (Hoists for the transfer of disabled persons). This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit some bariatric people. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we can supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242126512440,"sku":"220RP","price":305.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/img_2068.jpg?v=1747626043"},{"product_id":"resqsheet","title":"ResQsheet","description":"\u003cp\u003eThe ResQsheet is for emergency evacuation of non-ambulant patients and kept in position under the mattress with strong elastic corner straps, and is large enough to fit a King Single size bed. Daily bed making is as normal.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nFor better sliding properties on carpet, consider the\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet.\u003cbr\u003e\nFor Deep or Airflow Mattresses:\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\n.\u003cbr\u003e\nOverview\u003cbr\u003e\nPulling Straps sewn half way down the length to allow for more rescuers\u003cbr\u003e\nCross Straps sewn all the way across the material for extra strength\u003cbr\u003e\nBuilt in plastic slide board – excellent for sliding on all surfaces\u003cbr\u003e\nPlastic buckles – safer than metal buckles\/will not damage a washing machine\u003cbr\u003e\nMiracle Grip on the sides to help prevent the mattress slipping on bed frame\u003cbr\u003e\nPress studs \u0026amp; pockets to safely contain the straps\u003cbr\u003e\nIf there is an emergency, then the webbing straps are removed from their pockets and quickly done up around the mattress and the Patient. The head and foot end pulling straps are also taken out from under the mattress. The mattress and the Patient are then lowered onto the floor for very fast and safe evacuation. This saves the staff from having to carry them. The Patient is protected by their mattress and they can be easily taken down stairs to safety.\u003cbr\u003e\nAfter an emergency evacuation, the Patient can be left still cocooned in the ResQsheet which may be helpful with patients who are liable to wander. The Cross Straps are sewn across the full width of the ResQsheet to provide extra security in case the strong nylon material should tear on a rough surface, i.e. driveways, roads, etc.\u003cbr\u003e\nThere are many names by which this type of item is known. Some include: Evacuation Sheets, Fire Sheets, Fire Rescue Sheets, Fire Evacuation Sheets, Fire Blankets, or Ski Sheets.\u003cbr\u003e\nSpecial Features\u003cbr\u003e\nWith any make of evacuation sheet, the Pulling Straps and Cross Straps can fall out from under the mattress. If this happens, the buckles can be damaged by the side rails, or when the bed is raised or lowered. Also the Pulling Straps can be tangled on a fitting at the end of the bed. It is always best to avoid the straps becoming tangled on the bed, as this could delay a fast evacuation. To help keep the straps in place, Pelican have included Press Studs\u003cbr\u003e\n(Patent applied for)\u003cbr\u003e\nand pockets that keep all of the straps secured to the ResQsheet.\u003cbr\u003e\nA trend with hospital beds is to no longer have small metal bars to hold a mattress in position. Two pieces of Miracle Grip rubber material are sewn to each side\u003cbr\u003e\n(Patent applied for)\u003cbr\u003e\n, on the top and bottom to help prevent the mattress from moving when the Patient gets in and out of bed. When the Cross Straps are done up, then the Miracle Grip is lifted off the floor, so it does not impede pulling.\u003cbr\u003e\nIf you find that using this product contributes to the mattress sliding on the bed frame and need extra support, we suggest using our\u003cbr\u003e\nAnti Slide Mattress Sticks\u003cbr\u003e\nor\u003cbr\u003e\nAnti Slide Mattress Pad\u003cbr\u003e\n(both sold separately)\u003cbr\u003e\n.\u003cbr\u003e\nThe ResQsheet is made from a strong white nylon material which is easy to see in the dark when taken outside if an evacuation takes place at night. The white colour shows dirt marks better, so you will know when it needs washing.\u003cbr\u003e\nTo Install\u003cbr\u003e\nThe ResQsheet is positioned under the mattress with the four elastic straps over each corner of the mattress to help keep the ResQsheet in position when bed making. The Cross Straps should be folded and secured into the pockets provided, ready for easy access in an emergency evacuation. Also secure the Head and Foot Straps using the Press Studs.\u003cbr\u003e\nTo Use\u003cbr\u003e\nPull the Cross Straps out of the pockets and join the buckle with the strap from the opposite pocket over the Patient and bed clothes. A pillow may be placed under the Cross Straps on the Patient’s chest, and another across their legs, to help further protect them.\u003cbr\u003e\nPull the Cross Straps tight to cocoon the Patient, complete with sheets and blankets still on the mattress. Take out the Head and Foot Pulling Straps from under the mattress. Lower the bed as far as possible. Then use the Straps to lower the Patient and mattress off the bed and slide along the floor by using the long Pulling Straps at either end.\u003cbr\u003e\nResQSheet Extension Straps\u003cbr\u003e\n(sold separately)\u003cbr\u003e\nare available which can fit to any of the Pelican ResQ products to allow for more people to pull.\u003cbr\u003e\nTesting\u003cbr\u003e\nThe materials used to make the ResQsheets are the same as we use for our Lifting Slings. When doing NATA Testing, the Slings lifted 1,000kg \/ 2200lbs without failing.\u003cbr\u003e\nWhen carrying out ‘In House’ testing, the ResQsheets were pulled at a fast walking speed on carpet and vinyl, with a load of 104kg \/ 229lbs. The test results can vary on different grades of carpet depending on the pile and underlay. With vinyl flooring, the type of vinyl and any polishes or cleaning materials used may also affect the pulling force. Therefore these results are just an indication of the reduction. The Initial Force was when the ResQsheets were on the floor. After taking the mattress off the bed, and starting to slide straight away, the initial force should be less. The table below shows the forces in relation to the ResQsheet, and the\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\n. If there are long corridors of carpet, we recommend the\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\n.\u003cbr\u003e\nItem Name\u003cbr\u003e\nPulling Weight\u003cbr\u003e\nCarpet Floor Initial Force\u003cbr\u003e\nCarpet Floor Sliding Force\u003cbr\u003e\nVinyl Floor Initial Force\u003cbr\u003e\nVinyl Floor Sliding Force\u003cbr\u003e\nResQsheet\u003cbr\u003e\n104kg \/ 229lbs\u003cbr\u003e\n36kg \/ 73lbs\u003cbr\u003e\n24kg \/ 54lbs\u003cbr\u003e\n35kg \/ 78lbs\u003cbr\u003e\n30kg \/ 67lbs\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\n104kg \/ 229lbs\u003cbr\u003e\n30kg \/ 67lbs\u003cbr\u003e\n15kg \/ 34lbs\u003cbr\u003e\n39kg \/ 87lbs\u003cbr\u003e\n38kg \/ 85lbs\u003cbr\u003e\nPlan Escape Routes for Fire Evacuation\u003cbr\u003e\nDo not have furniture that may impede pulling the mattress and Patient down a corridor. Make sure that there is enough space to leave the room and to turn in the corridor in an emergency evacuation.\u003cbr\u003e\nThe full range of ResQproduct options are listed below\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors including vinyl \u0026amp; carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors including vinyl \u0026amp; carpet. Design for deep and airflow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem #\u003cbr\u003e\n220\u003cbr\u003e\nSize:\u003cbr\u003e\n191cm x 88cm (75″ x 35″)\u003cbr\u003e\nSafe Working Load (SWL):\u003cbr\u003e\n300kg \/ 660lbs\u003cbr\u003e\nNote:\u003cbr\u003e\nThere is no Standard for this product, therefore we have adopted the testing requirements as set out in International Standard ISO 10535:2011:\u003cbr\u003e\nHoists for the transfer of disabled persons – Requirements and test methods\u003cbr\u003e\n. This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. An important difference is that the ResQ products are designed to be slid, not lifted, so the SWL stated above could theoretically be increased. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit\u003cbr\u003e\nsome bariatric people\u003cbr\u003e\n. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we may be able to supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242127528248,"sku":"220","price":137.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/7-resqsheet-main-image.jpg?v=1747626070"},{"product_id":"resqsheet-extension-straps","title":"ResQsheet Extension Straps","description":"\u003cp\u003eThe ResQsheet Extension Straps help make evacuation device straps longer. This product can be be used for:\u003cbr\u003e\nResQsheet\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nResQsheet – Bariatric Size\u003cbr\u003e\nResQsheet for Trolley Beds\u003cbr\u003e\nResQmat\u003cbr\u003e\nResQpod\u003cbr\u003e\nResQme\u003cbr\u003e\nYou can easily lasso onto the existing Pulling Straps.\u003cbr\u003e\nThe Extension Pulling Straps will allow Rescuers to have different pulling positions while pulling from the same end. It will also give more space for two people to pull a patient, without being too close to each other.\u003c\/p\u003e\n\n\u003cp\u003eItem # 220E\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242127855928,"sku":"220E","price":32.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/1-resqsheet-extension-strap.jpg?v=1747626078"},{"product_id":"resqsheet-for-trolley-beds","title":"ResQsheet for Trolley Beds","description":"\u003cp\u003eBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nMain Features\u003cbr\u003e\nFor emergency evacuation of non-ambulant patients\u003cbr\u003e\nSpecially designed for narrow trolley beds\u003cbr\u003e\nLong pulling straps at each end, sewn half way down the length to allow for more rescuers\u003cbr\u003e\nPress studs \u0026amp; pockets for the Cross Straps to help contain the straps and prevent them getting caught in side rails\u003cbr\u003e\nPlastic buckles – safer than metal buckles when detached under strain, and will no damage a washing machine\u003cbr\u003e\nCross Straps sewn all the way across the material for extra strength – especially good for sliding on rough tarmac\/bitumen\/concrete\u003cbr\u003e\nNarrow Trolley Beds are used in many hospitals in the Emergency Departments, Day Wards and other departments. Trolley Beds are narrower than a standard bed so when making the bed, the standard size ResQsheet (92cm \/ 36″ wide), is not held correctly in position by the elastic corner straps. If a standard size ResQsheet is used under the mattress, the sides of the ResQsheet can wrap around the sides of the mattress. This slippery material can be dangerous if a patient sits on the side of the bed. They may make the mattress slide from under them, and the patient may fall to the floor.\u003cbr\u003e\nThe Trolley Bed mattress should have a non-slip material on the bottom. However, the mattresses are very lightweight and it is easy for them to move or slip. Normally standard width bed sheets are used on the Trolley Bed. When tucked under the mattress, the non-slip bottom of the mattress is prevented from directly touching the Trolley Bed Base. This can make the mattress prone to slipping. To overcome slipping when the patient is sitting on the side of the bed, Pelican suggests using the Anti Slide Mattress Pad. These Pads are made from Miracle Grip material with a foam interior to keep it flat on the Trolley Bed Base, and a vinyl heat sealed version is available.\u003cbr\u003e\nAfter evacuation, the patient can be left still cocooned in the ResQsheet which may be helpful with patients who are liable to wander. The Cross Straps are sewn across the full width of the ResQsheet to provide extra security in case the strong nylon material should tear on a rough surface, i.e. driveways, roads, etc.\u003cbr\u003e\nSpecial Features\u003cbr\u003e\nSpecial Press Studs (Patent Applied For) are on the Pulling Straps and the Cross Straps. By doing the Press Studs up, the webbing will be kept in place to help prevent the Pulling Straps falling off the ends of the bed. There have been occasions when these straps have been tangled on attachments to the bed and have delayed a fast evacuation. The Cross Straps also have Press Studs to stop the straps falling between the bed side rail and the bed base.\u003cbr\u003e\nTwo pieces of Miracle Grip Rubber material are sewn to each side, at the top and bottom. A trend with hospital beds is to no longer have small metal bars to hold a mattress in position. This means that the mattress may slip when someone gets into or out of bed. If you find that using this product may contribute to the mattress sliding on the bed frame, we suggest using our\u003cbr\u003e\nAnti Slide Mattress Sticks\u003cbr\u003e\nor\u003cbr\u003e\nAnti Slide Mattress Pad\u003cbr\u003e\n(both sold separately).\u003cbr\u003e\nThere are many names by which this type of item is known. Some include: Evacuation Sheets, Fire Sheets, Fire Rescue Sheets, Fire Evacuation Sheets, Fire Blankets, or Ski Sheets.\u003cbr\u003e\nComparison Between Our ResQ Products\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nTo Install\u003cbr\u003e\nThe Pulling Cross Straps are a bright orange colour. This easily identifies it is a different size from the standard bed width ResQsheets. The elastic will fit over both ends of the mattress, even if the two ends are different shapes. They keep the ResQsheet in place when making the bed. Fit the ResQsheet under the mattress with the ‘This Way Up’ label facing up. It does not matter which ends are at the Head or Foot end as the ResQsheet is symmetrical. Store the folded Cross Straps in pockets and secure with the Press Studs. This will hold the straps in place during bed making.\u003cbr\u003e\nTo Use\u003cbr\u003e\nPull the Cross Straps out of the pockets and join the buckle with the strap from the opposite pocket over the patient and bed clothes. You can place a pillow on the patient’s chest and another across the legs, under the Cross Straps to further protect the patient.\u003cbr\u003e\nPull the Cross Straps tight to cocoon the patient, complete with sheets and blankets still inside the mattress. Take out the Head and Foot Pulling Straps from under the mattress. Lower the bed as far as possible. Then use the Straps to lower the patient and mattress off the bed and slide along the floor by using the long Pulling Straps at either end.\u003cbr\u003e\nResQSheet Extension Straps\u003cbr\u003e\n(sold separately) are available which can fit to any of the Pelican ResQ products to allow for more people to pull.\u003cbr\u003e\nThe ResQsheet for Trolley Beds is made from a strong white nylon material. This is easy to see in the dark when taken outside if an evacuation takes place at night.\u003cbr\u003e\nComparison between our ResQsheet types\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nPlan Escape Routes for Fire Evacuation\u003cbr\u003e\nDo not have furniture that may impede pulling the mattress and patient down a corridor. Make sure that there is enough space to leave the room and to turn in the corridor.\u003cbr\u003e\nMost fires start in laundries and kitchens. Make sure that you can evacuate the building without passing these high risk areas. Have alternative escape routes if the fire originates from a room.\u003cbr\u003e\nAll staff should have regular fire drills, so that in an emergency they are familiar with evacuation procedures.\u003cbr\u003e\nAll facilities must have full instructions in the use of evacuation equipment and evacuation routes from their own trainers.\u003cbr\u003e\nThe full range of ResQproduct options are listed below.\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nSame as the ResQsheet above, but with a built-in white plastic slide board underneath. Slides well on all floor surfaces including Vinyl \u0026amp; Carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nA special version of our ResQsheet for Vinyl \u0026amp; Carpet, made to fit deep mattress beds, and can also be used with pressure care air-flow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem #\u003cbr\u003e\n220T\u003cbr\u003e\nSize:\u003cbr\u003e\n187cm x 68cm (74″ x 27″)\u003cbr\u003e\nSafe Working Load (SWL):\u003cbr\u003e\n300kg \/ 660lbs\u003cbr\u003e\nNote:\u003cbr\u003e\nThere is no Standard for this product, therefore we have adopted the testing requirements as set out in International Standard ISO 10535:2011:\u003cbr\u003e\nHoists for the transfer of disabled persons – Requirements and test methods\u003cbr\u003e\n. This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. An important difference is that the ResQ products are designed to be slid, not lifted, so the SWL stated above could theoretically be increased. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit some bariatric people. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we may be able to supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242128478520,"sku":"220T","price":136.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/resqsheet-for-trolley-beds.jpg?v=1747626093"},{"product_id":"resqsheet-for-vinyl-carpet-deep-airflow","title":"ResQsheet for Vinyl \u0026 Carpet – Deep \u0026 Airflow","description":"\u003cp\u003eThe ResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow is for the emergency evacuation of non-ambulant Patients. Daily bed making is as normal.\u003cbr\u003e\nIt is designed for Single \u0026amp; King Single size beds with deep mattress, and can also be used with most\u003cbr\u003e\nair-flow mattresses for pressure care\u003cbr\u003e\n.\u003cbr\u003e\nAn alternative product is the\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\n, which is designed for standard size mattresses.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nOverview\u003cbr\u003e\nThe Patient is protected by their mattress and can be taken down stairs to safety\u003cbr\u003e\nPulling Straps sewn half way down the length to allow for more rescuers\u003cbr\u003e\nCross Straps sewn all the way across the material for extra strength\u003cbr\u003e\nBuilt in plastic slide board – excellent for sliding on all surfaces, especially carpet \u0026amp; vinyl\u003cbr\u003e\nStrong elastic corner straps\u003cbr\u003e\nPlastic buckles – safer than metal buckles\/will not damage a washing machine\u003cbr\u003e\nMiracle Grip on the sides to help prevent the mattress slipping on bed frame\u003cbr\u003e\n(Patent Applied For)\u003cbr\u003e\nPress studs \u0026amp; elastic loops to safely contain the straps\u003cbr\u003e\nSpecial Features\u003cbr\u003e\nThe ResQsheet for Vinyl \u0026amp; Carpet is made from a strong white nylon material which is easy to see in the dark when taken outside if an evacuation takes place at night.\u003cbr\u003e\nIt is always best to avoid the straps becoming tangled on the bed, as this could delay a fast evacuation. To help keep the straps in place, we have included Press Studs\u003cbr\u003e\n(Patent applied for)\u003cbr\u003e\nand pockets that keep all of the straps secured to the ResQsheet when under the mattress.\u003cbr\u003e\nTo Install\u003cbr\u003e\nPosition the ResQsheet under the mattress with the four elastic straps over each corner of the mattress to help keep the it in position when bed making. Fold the Cross Straps and secure into the pockets provided, ready for easy access in an emergency. Secure the Head and Foot Straps using the Press Studs.\u003cbr\u003e\nTo Use\u003cbr\u003e\nPull the Cross Straps out of the pockets or elastic loops and join the buckle with the strap from the opposite pocket over the Patient and bed clothes. A pillow may be placed under the Cross Straps on the Patient’s chest, and another across their legs, to help further protect them.\u003cbr\u003e\nPull the Cross Straps tight to cocoon the Patient, complete with sheets and blankets still on the mattress. Take out the Head and Foot Pulling Straps from under the mattress. Lower the bed as far as possible.\u003cbr\u003e\nUse the Pulling Straps to lower the Patient and mattress off the bed and slide along the floor by using the long Pulling Straps at either end.\u003cbr\u003e\nResQSheet Extension Straps\u003cbr\u003e\n(sold separately)\u003cbr\u003e\nare available which can fit to any of the ResQ products to allow for more people to pull.\u003cbr\u003e\nAfter evacuation, the Patient can be left cocooned in the ResQsheet, which may be helpful with Patients who are liable to wander.\u003cbr\u003e\nTesting\u003cbr\u003e\nThe materials used to make the ResQsheets are the same as we use for our Lifting Slings.\u003cbr\u003e\nWhen carrying out ‘In House’ testing, the ResQsheet were pulled at a fast walking speed on carpet and vinyl, with a load of 104kg \/ 229lbs. The test results can vary on different grades of carpet depending on the pile and underlay. With vinyl flooring, the type of vinyl and any polishes or cleaning materials used may also affect the pulling force. Therefore these results are just an indication of the reduction.\u003cbr\u003e\nThe Initial Force was when the ResQsheets were on the floor. When starting to slide, the initial force should be less. The table below shows the forces in relation to the\u003cbr\u003e\nResQsheet\u003cbr\u003e\n, and the ResQsheet for Vinyl \u0026amp; Carpet. If there are long corridors of carpet, we recommend using the ResQsheet for Vinyl \u0026amp; Carpet.\u003cbr\u003e\nItem Name\u003cbr\u003e\nPulling Weight\u003cbr\u003e\nCarpet Floor Initial Force\u003cbr\u003e\nCarpet Floor Sliding Force\u003cbr\u003e\nVinyl Floor Initial Force\u003cbr\u003e\nVinyl Floor Sliding Force\u003cbr\u003e\nResQsheet\u003cbr\u003e\n104kg \/ 229lbs\u003cbr\u003e\n36kg \/ 73lbs\u003cbr\u003e\n24kg \/ 54lbs\u003cbr\u003e\n35kg \/ 78lbs\u003cbr\u003e\n30kg \/ 67lbs\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\n104kg \/ 229lbs\u003cbr\u003e\n30kg \/ 67lbs\u003cbr\u003e\n15kg \/ 34lbs\u003cbr\u003e\n39kg \/ 87lbs\u003cbr\u003e\n38kg \/ 85lbs\u003cbr\u003e\nThere are many names by which this type of item is known, including:\u003cbr\u003e\nEvacuation Sheets, Fire Sheets, Fire Rescue Sheets, Fire Evacuation Sheets, Fire Blankets,\u003cbr\u003e\nor\u003cbr\u003e\nSki Sheets.\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nThe full range of ResQproduct options are listed below\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors including vinyl \u0026amp; carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors including vinyl \u0026amp; carpet. Design for deep and airflow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem #\u003cbr\u003e\n220VCDA\u003cbr\u003e\nSize:\u003cbr\u003e\n191cm x 88cm (75″ x 35″)\u003cbr\u003e\nMaximum circumference of Cross Straps (including mattress):\u003cbr\u003e\n270cm (106″)\u003cbr\u003e\nNote:\u003cbr\u003e\nThere is no Standard for this product, therefore we have adopted the testing requirements as set out in International Standard ISO 10535:2011:\u003cbr\u003e\nHoists for the transfer of disabled persons – Requirements and test methods\u003cbr\u003e\n. This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. An important difference is that the ResQ products are designed to be slid, not lifted, so the SWL stated above could theoretically be increased. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit some bariatric people. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we may be able to supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242128707896,"sku":"220VCDA","price":220.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/resqsheet-for-vinyl-carpet-deep-airflow.jpg?v=1747626106"},{"product_id":"resqsheet-for-vinyl-carpet","title":"ResQsheet for Vinyl \u0026 Carpet","description":"\u003cp\u003eThe\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nis for the emergency evacuation of non-ambulant Patients. Daily bed making is as normal. It is designed to fit Single \u0026amp; King Single size beds.\u003cbr\u003e\nIt is designed for Single and some King Single size beds. An alternative product is the\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\n, which is designed for most air-flow mattresses for pressure care.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nOverview\u003cbr\u003e\nThe Patient is protected by their mattress and can be taken down stairs to safety\u003cbr\u003e\nPulling Straps sewn half way down the length to allow for more rescuers\u003cbr\u003e\nCross Straps sewn all the way across the material for extra strength\u003cbr\u003e\nBuilt in plastic slide board – excellent for sliding on all surfaces, especially carpet \u0026amp; vinyl\u003cbr\u003e\nStrong elastic corner straps\u003cbr\u003e\nPlastic buckles – safer than metal buckles\/will not damage a washing machine\u003cbr\u003e\nMiracle Grip on the sides to help prevent the mattress slipping on bed frame\u003cbr\u003e\n(Patent Applied For)\u003cbr\u003e\nPress studs \u0026amp; pockets to safely contain the straps\u003cbr\u003e\nSpecial Features\u003cbr\u003e\nThe ResQsheet for Vinyl \u0026amp; Carpet is made from a strong white nylon material which is easy to see in the dark when taken outside if an evacuation takes place at night.\u003cbr\u003e\nIt is always best to avoid the straps becoming tangled on the bed, as this could delay a fast evacuation. To help keep the straps in place, we have included Press Studs\u003cbr\u003e\n(Patent applied for)\u003cbr\u003e\nand pockets that keep all of the straps secured to the ResQsheet when under the mattress.\u003cbr\u003e\nTo Install\u003cbr\u003e\nPosition the ResQsheet under the mattress with the four elastic straps over each corner of the mattress to help keep the it in position when bed making. Fold the Cross Straps and secure into the pockets provided, ready for easy access in an emergency. Secure the Head and Foot Straps using the Press Studs.\u003cbr\u003e\nTo Use\u003cbr\u003e\nPull the Cross Straps out of the pockets or elastic loops and join the buckle with the strap from the opposite pocket over the Patient and bed clothes. A pillow may be placed under the Cross Straps on the Patient’s chest, and another across their legs, to help further protect them.\u003cbr\u003e\nPull the Cross Straps tight to cocoon the Patient, complete with sheets and blankets still on the mattress. Take out the Head and Foot Pulling Straps from under the mattress. Lower the bed as far as possible.\u003cbr\u003e\nUse the Pulling Straps to lower the Patient and mattress off the bed and slide along the floor by using the long Pulling Straps at either end.\u003cbr\u003e\nResQSheet Extension Straps\u003cbr\u003e\nare available which can fit to any of the ResQ products to allow for more people to pull.\u003cbr\u003e\nAfter evacuation, the Patient can be left cocooned in the ResQsheet, which may be helpful with Patients who are liable to wander.\u003cbr\u003e\nTesting\u003cbr\u003e\nThe materials used to make the ResQsheets are the same as we use for our Lifting Slings.\u003cbr\u003e\nWhen carrying out ‘In House’ testing, the ResQsheet were pulled at a fast walking speed on carpet and vinyl, with a load of 104kg \/ 229lbs. The test results can vary on different grades of carpet depending on the pile and underlay. With vinyl flooring, the type of vinyl and any polishes or cleaning materials used may also affect the pulling force. Therefore these results are just an indication of the reduction.\u003cbr\u003e\nThe Initial Force was when the ResQsheets were on the floor. When starting to slide, the initial force should be less. The table below shows the forces in relation to the\u003cbr\u003e\nResQsheet\u003cbr\u003e\n, and the ResQsheet for Vinyl \u0026amp; Carpet. If there are long corridors of carpet, we recommend using the ResQsheet for Vinyl \u0026amp; Carpet.\u003cbr\u003e\nItem Name\u003cbr\u003e\nPulling Weight\u003cbr\u003e\nCarpet Floor Initial Force\u003cbr\u003e\nCarpet Floor Sliding Force\u003cbr\u003e\nVinyl Floor Initial Force\u003cbr\u003e\nVinyl Floor Sliding Force\u003cbr\u003e\nResQsheet\u003cbr\u003e\n104kg \/ 229lbs\u003cbr\u003e\n36kg \/ 73lbs\u003cbr\u003e\n24kg \/ 54lbs\u003cbr\u003e\n35kg \/ 78lbs\u003cbr\u003e\n30kg \/ 67lbs\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\n104kg \/ 229lbs\u003cbr\u003e\n30kg \/ 67lbs\u003cbr\u003e\n15kg \/ 34lbs\u003cbr\u003e\n39kg \/ 87lbs\u003cbr\u003e\n38kg \/ 85lbs\u003cbr\u003e\nThere are many names by which this type of item is known, including:\u003cbr\u003e\nEvacuation Sheets, Fire Sheets, Fire Rescue Sheets, Fire Evacuation Sheets, Fire Blankets,\u003cbr\u003e\nor\u003cbr\u003e\nSki Sheets.\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nThe full range of ResQproduct options are listed below\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors including vinyl \u0026amp; carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors including vinyl \u0026amp; carpet. Design for deep and airflow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem #\u003cbr\u003e\n220VC\u003cbr\u003e\nSize:\u003cbr\u003e\n191cm x 88cm (75″ x 35″)\u003cbr\u003e\nMaximum circumference of Cross Straps (including mattress):\u003cbr\u003e\n240cm (94.5″)\u003cbr\u003e\nSafe Working Load (SWL):\u003cbr\u003e\n300kg \/ 660lbs\u003cbr\u003e\nNote:\u003cbr\u003e\nThere is no Standard for this product, therefore we have adopted the testing requirements as set out in International Standard ISO 10535:2011:\u003cbr\u003e\nHoists for the transfer of disabled persons – Requirements and test methods\u003cbr\u003e\n. This Standard covers testing for mechanical lifting hoists and associated lifting slings. It includes a method for obtaining a SWL for a lifting sling which lifts a person’s entire weight, which Pelican’s range of slings adhere to. We use the same materials, thread and method of stitching our slings, as we do for the ResQ products. An important difference is that the ResQ products are designed to be slid, not lifted, so the SWL stated above could theoretically be increased. Because people’s weight and size may be distributed differently between the chest, stomach and legs, it may be possible that the Cross Straps do not fit some bariatric people. If possible, we recommend this is tested before an emergency occurs. If this is the case, please contact us as we may be able to supply extension Cross Straps.\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242130051384,"sku":"220VC","price":210.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/4-resqsheet-for-vinyl-carpet-main-image.jpg?v=1747626127"},{"product_id":"resqslide-board-chair-strap-kit","title":"ResQslide Board \u0026 Chair Strap Kit","description":"\u003cp\u003eThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the\u003cbr\u003e\nResQmat\u003cbr\u003e\n,\u003cbr\u003e\nResQpod\u003cbr\u003e\nor\u003cbr\u003e\nResQme\u003cbr\u003e\n(all sold separately)\u003cbr\u003e\nwhich can slide down stairs.\u003cbr\u003e\nBefore ordering, please view the entire range of ResQ Products listed at the bottom of this page to ensure that you select the most appropriate product for your needs and circumstances. If you require assistance choosing, please\u003cbr\u003e\ncontact us\u003cbr\u003e\n.\u003cbr\u003e\nIf a Patient is in an armchair, electric or manual wheelchair and they need to be taken out of the chair in an emergency, this could be a very difficult and possibly dangerous task for the Patient and the Carers. The emergency maybe be due to a fire. In which case the lifts in the building cannot be used to evacuate. The only means of escape would be to use the stairs. Another emergency could be if a Patient is having a fit or seizure and they may need CPR.\u003cbr\u003e\nThe ResQslide Board is extremely strong and will bend when in use but not break. The outer surface may mark easily and a new board may look second hand when new. The advantages of using this material outweigh the disadvantages.\u003cbr\u003e\nSometimes in an emergency there may not be enough time to use the Chair Strap, so we suggest staff try to use the ResQslide Board without the Chair Strap. The Chair Strap is designed to help keep the ResQslide Board in position and allow the Carers to pay more attention to sliding the Patient .\u003cbr\u003e\nNote: As this is considered an over-sized item, customers from outside of Australia should\u003cbr\u003e\ncontact\u003cbr\u003e\nus before placing an order so that we can provide an accurate shipping cost.\u003cbr\u003e\nTo Use\u003cbr\u003e\nSimply lasso the two Female buckles through the front hand slots. These can be left in position when the Board is not in use, to save time in an emergency. It is possible to put a stitch in the lasso so they are not easily removed. We suggest one of the Male buckles is attached to a Female buckle, so the long Chair Strap is not lost in storage.\u003cbr\u003e\nWhen using the ResQslide Board \u0026amp; Chair Strap Kit, slide the Board under the Patient ‘s bottom. Then the Chair Strap can be placed around the back of the chair and buckled together. Adjust to size to take up any excess webbing behind the chair. Positioning the Strap behind the chair will depend on the design and size of the chair.\u003cbr\u003e\nAfter the Patient has slid down from the chair and they are in position on the evacuation device, remember to undo the Chair Strap before removing the ResQslide Board from under the Patient.\u003cbr\u003e\nThe Chair Strap has been made very long for large armchairs. When using on a small wheelchair there will be a lot of spare webbing to adjust to size. We suggest trying out different ways of fitting to different chairs, so staff will be trained before an emergency. The procedure should be recorded, possibly with photos and kept with the ResQslide Board.\u003cbr\u003e\nAlso available in the Pelican Slide Board range:\u003cbr\u003e\nSlide Board – Aero Transfer\u003cbr\u003e\nSlide Board –\u003cbr\u003e\nStubby\u003cbr\u003e\nSlide Board – Boomerang\u003cbr\u003e\nSlide Board – Wheelchair Cut Out\u003cbr\u003e\nCar Emergency Slide Board Kit\u003cbr\u003e\nThe full range of ResQproduct options are listed below.\u003cbr\u003e\nClick\u003cbr\u003e\nhere\u003cbr\u003e\nto view the Features List for the range of Pelican evacuation devices.\u003cbr\u003e\nResQsheet\u003cbr\u003e\nStored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet\u003cbr\u003e\nSame as the ResQsheet above, but with a built-in white plastic slide board underneath. Slides well on all floor surfaces including Vinyl \u0026amp; Carpet.\u003cbr\u003e\nResQsheet for Vinyl \u0026amp; Carpet – Deep \u0026amp; Airflow\u003cbr\u003e\nA special version of our ResQsheet for Vinyl \u0026amp; Carpet, made to fit deep mattress beds, and can also be used with pressure care air-flow mattresses.\u003cbr\u003e\nResQme\u003cbr\u003e\nThis is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.\u003cbr\u003e\nResQpod\u003cbr\u003e\nSame as the ResQme above, but with more Cross Straps to contain the Patient.\u003cbr\u003e\nResQmat\u003cbr\u003e\nSame as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.\u003cbr\u003e\nResQslide Board \u0026amp; Chair Strap Kit\u003cbr\u003e\nThe ResQslide Board \u0026amp; Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.\u003c\/p\u003e\n\n\u003cp\u003eItem # 220PSBK\u003cbr\u003e\nSlide Board Size: 147.5cm x 40cm \/ 58″ x 15.7″\u003cbr\u003e\nStrap Length (combined): 243cm x 95.6″\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242131362104,"sku":"220PSBK","price":393.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/resqslide-board-chair-stra-kit-main.jpg?v=1747626147"},{"product_id":"security-id-tags","title":"Security ID Tags","description":"\u003cp\u003eThe Security ID Tags are a great way of ensuring something has not been opened. The are also know as tamper-proof clips or security tags.\u003cbr\u003e\nThere are many times staff will open bags to remove something from inside, but then the item is not replaced. This is a problem for the next person who needs the equipment. Examples may be:\u003cbr\u003e\nBags for oxygen tubing\u003cbr\u003e\nOxygen masks\u003cbr\u003e\nTools such as spanners\u003cbr\u003e\nNasal cannula\u003cbr\u003e\nLatex gloves\u003cbr\u003e\nJankauer sucker and suction catheter\u003cbr\u003e\nSome of these examples may be life-threatening.\u003cbr\u003e\nSecurity ID Tags incorporated in other Pelican products\u003cbr\u003e\nPelican uses these Security ID Tags on our range of Evacuation ResQ products for emergency fire evacuations.\u003cbr\u003e\nResQmat\u003cbr\u003e\nResQpod\u003cbr\u003e\nResQme\u003cbr\u003e\nNormally one evacuation product is used for staff training, and there may be 20 more kept ready for an emergency evacuation. By having a Security ID Tag on the bag of the stored evacuation products, it will be obvious if they have been tampered with. The evacuation product used for training should be the only one with a broken tag.\u003cbr\u003e\nIf the security number is recorded in a register, then it will indicate when the Annual Inspection for the evacuation product has been carried out. It should also show who did the inspection. If the evacuation product is used in an emergency situation, then the Security ID Tag will quickly release when the bag is opened.\u003cbr\u003e\nThe Security ID Tag numbers are unique. We deliberately packed them randomly, and the numbers are not in sequence.\u003cbr\u003e\nThis product comes in a pack of 25.\u003c\/p\u003e\n\n\u003cp\u003eItem # 9710\u003cbr\u003e\nPack of 25\u003c\/p\u003e","brand":"Pelican","offers":[{"title":"Default","offer_id":50242132279608,"sku":"9710","price":19.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8801\/8488\/files\/security-id-tags-5.jpg?v=1747626160"}],"url":"https:\/\/suppliers.bettercaremarket.com.au\/collections\/evacuation-fire-rescue-equipment.oembed","provider":"bettercaremarket","version":"1.0","type":"link"}